Eight Major Challenges Facing China's Pump Industry
The localization rate of pumps for major projects has gradually increased, and domestic products now basically meet the needs of national economic development. However, looking at the industry as a whole, China still lags behind industrialized countries. In particular, enterprises have weak independent development capability, core technologies for the high-tech, high-value-added products urgently needed by the national economy have not yet been mastered, and many problems remain to be solved.
1. Insufficient R&D funding
Domestic enterprises show an obvious gap compared with well-known foreign companies in product technology accumulation and new product development. Insufficient investment in science and technology funds and R&D has become a major factor restricting independent R&D in the pump manufacturing industry. According to incomplete industry statistics, R&D investment accounts for less than 2% of enterprise sales revenue; compared with well-known foreign companies, the R&D investment of the entire industry is negligible, seriously restricting the development of new technologies, new products, new materials and new processes.
2. Weak independent innovation capability
The digestion and absorption of introduced technology is slow, most enterprises have weak technological innovation capability, and they lack manufacturing technology and product technology with independent intellectual property rights. Although most products in the pump industry are basically manufactured independently, some major technical equipment still relies on foreign core technologies owing to the lack of independent intellectual property rights. Domestic pump manufacturers mostly undertake the low-end processing of products, and the breadth and depth of independent development still need to be improved. For example, the nuclear-grade pumps in nuclear power plant complete sets and the core packages of high-pressure boiler feed pumps in million-kilowatt supercritical and ultra-supercritical thermal power plant complete sets are already manufactured domestically, but the key core technologies of high-pressure low-flow pumps, corrosion-resistant chemical process pumps, corrosion- and wear-resistant centrifugal pumps for coal liquefaction and positive displacement pumps required by large petrochemical complete sets still mostly need to be introduced, and this is the direction that domestic pump enterprises should focus on.
3. Weak basic supporting components
The development of basic technology lags behind, and basic supporting components are an even weaker link. For a long time, owing to the lack of due attention to basic technology research, the development of basic machinery and basic components in China's equipment manufacturing industry has lagged, becoming the primary factor restricting the development of major technical equipment. Basic supporting mechanical products such as mechanical seals, instruments and minimum flow devices are mostly of low and medium grade, with unstable performance and quality, which is also an important reason why many users choose to buy foreign pump products.
4. Core technology dependent on imports
Important technical equipment still needs to be imported. The domestic pump industry pays too much attention to introduction and neglects the digestion, absorption and re-innovation of introduced technology, and blind repeated introduction is serious. Shortening the gap with advanced world levels by introducing advanced foreign design and manufacturing technology is still an important channel for the technological development and upgrading of the pump manufacturing industry. In the 1990s, although the domestic pump manufacturing industry could provide some major equipment and products needed for economic construction, core technologies still mainly relied on foreign introduction, and the industry's own independent development and digestion, absorption and re-innovation capabilities were still very weak.
5. Weak complete-set capability
The overall design and complete-set capability of domestic pump enterprises is too weak. The industry as a whole lacks general contracting enterprises with system design, complete-set capability and system service functions.
This is mainly reflected in the following two aspects:
On the one hand, in major complete-set projects, China's pump manufacturing industry has weak overall design and system integration capabilities, making it difficult to provide users with comprehensive solutions and "turnkey projects";
On the other hand, the development of China's pump manufacturing industry is a rather complex systems engineering task that requires close cooperation among research institutes, design institutes, manufacturing units, manufacturing enterprises and application departments for collaborative large-scale production.
However, the current situation of the domestic pump industry is completely different: enterprises with general contracting capability have not yet been formed, and research institutes, design institutions and manufacturing enterprises operate independently. Some complete-set equipment manufacturing systems have been gradually crushed and squeezed out by multinational companies in fierce international and domestic market competition, becoming component suppliers to multinational companies.
6. Application departments "obsessed" with imported pumps
The lack of enthusiasm of application departments for purchasing domestic pumps will inevitably hamper the enthusiasm of pump manufacturers to vigorously develop products with independent intellectual property rights and patents. After more than half a century of development, especially during the national "11th Five-Year Plan" and "12th Five-Year Plan" periods, the construction of a number of key projects such as ten-million-ton ethylene, ten-million-ton refining and million-kilowatt nuclear power has driven the development of China's pump products, and domestically produced equipment has increased day by day. The technical level of Chinese pump manufacturers has a great price advantage over foreign ones, and domestic pump products should gain a larger market share. However, because some user departments blindly pursue the most advanced foreign technical equipment and do not consider cost performance at all, there are countless examples of domestic pump products being defeated by foreign products in domestic procurement bidding. In particular, for independent innovation, the first set of major technical equipment pump products developed in-house has reached or exceeded similar foreign products, but user departments still refuse to use them on various pretexts such as operating performance records, making it very difficult for domestic pump products to be adopted in some key projects and key engineering works.
7. Low level of "integration of informatization and industrialization"
The national "12th Five-Year Plan" proposes comprehensively improving the level of informatization and promoting the deep integration of informatization and industrialization. During the "12th Five-Year Plan" period, pump manufacturers upgraded their ERP systems and introduced the Director6 production management system, the LPM system and others, but the application rate of information technology in the pump manufacturing industry is still relatively low. Information technology has become an indispensable means of improving production efficiency and added value in the industrial sector, including product upgrading, remote monitoring and wireless monitoring of key equipment, and enterprise operation and management, all of which are increasingly inseparable from the application of information technology. However, in the domestic pump industry, the comprehensive application of information technology has not been widely adopted in domestic pump manufacturing, which completely affects the future sustainable development of the pump industry, leaves pump enterprises with insufficient development momentum, restricts the overall development level of the industry, and makes it difficult for domestic pump enterprises to match advanced foreign enterprises.
8. Industry standards urgently need updating
Research on common industry technologies is lacking, and design, process, material and manufacturing standards and specifications urgently need to be updated. Owing to institutional reform, some research institutes serving the industry have become enterprises fighting individually, and their institutional nature and focus of work have changed greatly; their role in supporting industry technology is increasingly weakened, the development of new technologies and processes is relatively slow, and many standards for design, process, materials and manufacturing are difficult to align with foreign ones, thus creating an important bottleneck restricting the development of the pump industry.
In summary, although there are still many problems to be solved on the development path of the domestic pump industry, as long as enterprises think about and innovate around these problems, China's pump industry can still gain very good room for development. It is hoped that this article will serve as a wake-up call for pump enterprises so that the industry can achieve truly sustainable development